|
|
Build Your Online Product Catalogs?
| Product Name: |
10A PWM 12/24V Auto Solar Charge Controller
|
| Supply Ability: |
|
| Related proudcts |
controller, solar controller, charge controller, |
| Specifications |
Charging Mode:PWM Indicator:LED Digital Display |
| Price Term: |
FOB |
| Port of loading: |
Guangzhou |
| Minimum Order |
50 pcs |
| Unit Price: |
US$13 |
|
10A PWM 12/24V Auto Solar charge Controller (QWP-H10A)
Specifications
10A electric regulator / solar charge controller
PWM
Morning light mode
Various status indications
Samples are available
1. ***ails
Double interval design, solar power supply can be used into section.
Auto 12V/24V identification system.
LED display and single key operation.
Ternary form charging algorithm adopted, equalizing charge the storage battery once a week at least.
Five working mode, convenient for the street lamp or monitoring devices using.
Industrial level design, can be used in any environment outdoor.
Parameter can be stored when the power failure. No need to set up again.
Values status indications.
Over charging, over discharging, over load, short circus and reverse polarity protections.
TVS lightning protection.
Modes
Pure light-controlled
Light + time controlled
Manual operation
Debug mode
5. Normally on mode
***ail pictures for reference
2. Installation and wiring
1. Installation of controller should be stable and dimensions are as follows:
Overall dimension: 124.7*69.4*34.0(mm)
Installation dimension: 112.4*54(mm)
Installation hole diameter: 3.6(mm)
2. Our controller can work under 12V or 24V voltage. Please connect the storage battery at first, controller will work after recognize the battery volt automatically. If 12V, the digital tube will shows "12V". If 24V, the digital tube will shows " 24V".
3. First, connected to the storage battery: Pay attention to the "+" and " -", in case of reverse connection. If connected well, the indicator light will be on. Otherwise, please check the connection.
4. Second, connected to the solar panel: Pay attention to the " +" and " -", in case of reverse connection. If connected well and have sunshine, the indicator light will be on. Otherwise, please check the connection.
5. Third, connected to the load: Connect the load lead with the load output end of controller, be care that the current must be less than the current rating of the solar controlle |
| Company: |
Guangzhou Queenswing Solar Energy Co., Limited
|
| Contact: |
Ms. Donny Fang |
| Address: |
B203A Cloud E-Town, No.3, Jiangxia North No.2 Road, Baiyun District, Guangzhou City, Guangdong Province, China |
| Postcode: |
510507 |
| Tel: |
86-20-38260096 |
| Fax: |
86-20-38260096 |
| E-mail: |
|
|
|
|
Home
